73. Oil Pan Installation

Oil Pan Installation





1. Apply sealer GM P/N 1234579 or the equivalent to both sides of the crankshaft rear main bearing cap (1). Press sealer into gap using a putty knife.
2. Install the oil pan gasket.





3. Install the oil pan.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the oil pan bolts.
- Tighten the oil pan bolts to 25 Nm (18 ft. lbs.).
5. Install the oil pan side bolts.
- Tighten the oil pan side bolts to 50 Nm (37 ft. lbs.).