Recirculation Door Replacement

REMOVAL PROCEDURE




1. Remove the HVAC module.
2. Remove the recirculation actuator.
3. Remove the recirculation housing retaining screws (1).
4. Remove the recirculation housing (2) from the HVAC module.




5. Remove the recirculation door (1) from the recirculation housing (2).

INSTALLATION PROCEDURE




1. Install the recirculation door (1) into the recirculation housing (2).




2. Align the retaining tabs and install the recirculation housing (2) to the HVAC module.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the recirculation housing screws.

Tighten
Tighten the recirculation housing screws to 1.5 N.m (13 lb in).

4. Install the recirculation actuator.
5. Install the HVAC module.