Closeout/Insulator Panel Replacement - Right

Instrument Panel Insulator Panel Replacement - Right Side

Tools Required

J 38778 Door Trim Pad Clip Remover


Removal Procedure





1. Use the J 38778 in order to remove the push-in retainers from the right instrument panel (IP) insulator.




2. Lower the insulator from the IP. Rotate the courtesy lamp counter clockwise. Remove the courtesy lamp from the insulator. Refer to Instrument Panel Courtesy Lamp Bulb Replacement.
3. Remove the right IP insulator.



Installation Procedure





1. Position the courtesy lamp into the right IP insulator. Rotate the courtesy lamp clockwise to secure correctly.





Important: Do not block the floor heater outlet with the right IP insulator.


2. Install the right IP insulator.
3. Install the push-in retainers to the right IP insulator.