Battery Hold Down Retainer Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Disconnect the negative battery cable.
2. Remove the battery hold down retainer bolt (1).
3. Remove the battery hold down retainer (2).

INSTALLATION PROCEDURE




1. Install the battery hold down retainer (2).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the battery hold down retainer bolt (1).

Tighten
Tighten the battery hold down retainer bolt to 18 N.m (13 lb ft).

3. Connect the negative battery cable.