Tilt Head Housing - Disassemble

Steering Column Tilt Head Housing - Disassemble - Off Vehicle
- Tools Required
- J 23653-SM Lock Plate Compressor
- J 42137 Lock Plate Compressor Adapter

Important: Let the inflatable restraint steering wheel module coil hang freely after removal.





1. Remove the inflatable restraint steering wheel module coil.
2. Remove the wave washer (1) from the steering shaft assembly (2).





3. Compress the shaft lock shield assembly (2) using J 23653-SIR and J 42137.
4. Remove the bearing retainer (1) from the steering shaft assembly.
5. Dispose of the bearing retainer.
6. Remove J23653-SIR and J42137from the steering shaft assembly.





7. Remove the shaft lock shield assembly (5) from the steering shaft assembly.
8. Remove the turn signal cancel cam assembly (4) from the steering shaft assembly.
9. Remove the upper bearing spring (3) from the steering shaft assembly.
10. Remove the upper bearing inner race seat (2) from the steering shaft assembly.
11. Remove the inner race (1) from the steering shaft assembly.