Piston Pin - Installation/Removal Revision: Overview
File In Section: 06 - Engine/Propulsion SystemBulletin No.: 01-06-01-002
Date: January, 2001
SERVICE MANUAL UPDATE
Subject:
Revised Piston Pin Removal/Installation Procedures
Models:
1994-96 Buick Regal
1994-98 Buick Skylark
1994-01 Buick Century
1994-95 Chevrolet Beretta, Corsica
1994-01 Chevrolet Lumina
1995-01 Chevrolet Monte Carlo
1996-01 Chevrolet Venture
1997-01 Chevrolet Malibu
2000-01 Chevrolet Impala
1994-98 Oldsmobile Achieva
1994-99 Oldsmobile Cutlass
1996-01 Oldsmobile Silhouette
1999-01 Oldsmobile Alero
1994-01 Pontiac Grand Am, Grand Prix
1996-99 Pontiac Trans Sport
1999-01 Pontiac Montana
2001 Pontiac Aztek
with 3.1L or 3.4L Engine (VINs J, M, E - RPOs LG8, L82, LA1)
This bulletin is being issued to revise the piston and rod assembly removal/installation procedures in the Engine Section of the Service Manual.
Revised Service Procedure
The following steps are provided to assist in the replacement of the piston assemblies.
Tools Required
^ J 24086 Connecting Rod Press
^ J 24086-C Piston Pin Remover/Installer
^ Connecting Rod Oven (Rod Kiln)
Disclaimer