Shifter A/T: Service and Repair

Shift Control Replacement
Removal Procedure





1. Remove the horseshoe clip (1) from front of shift control knob, and remove knob.
2. Remove the Console Trim Plate.





3. Remove the console wiring harness.





4. Remove the console shift control wiring harness.
5. Remove the automatic transaxle range selector cable.
6. Remove the park/lock cable.





7. Remove the console shift control nuts.
8. Remove the console shift control.

Installation Procedure





1. Install the console shift control.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the console shift control nuts.
^ Tighten the console shift control nuts to 24 Nm (18 ft. lbs.).
3. install the park/lock cable.
4. Install the automatic transaxle range selector cable.




5. Install the console shift control wiring harness.





6. Install the console wiring harness.
7. Install the Console Trim Plate.
8. Adjust the transaxle range selector cable.