Position Encoding System (PES)
The Position Encoding System (PES) tracks the position of the glass through two limit switches:^ Soft Stop limit.
^ Vent limit.
The sunroof module monitors the limit switches and based on the inputs determines the position of the sunroof glass. As a limit switch closes, the 5 volt reference will be shorted to the sunroof limit switch low reference circuit, pulling down the 5 volt reference to 0 volts.
The sunroof module understands the position of the sunroof glass based on the different input combinations through the sunroof limit switch soft stop signal and sunroof limit switch open vent signal circuits.