Heater Pipe Adapter Replacement - Outlet
TOOLS REQUIREDJ 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
2. Remove the fuel injector sight shield.
3. Remove the heater outlet hose from the pipe adapter.
4. Use J 38185 in order to position aside the heater hose clamp.
5. Remove the heater outlet adapter pipe mounting bolt.
6. Remove the heater outlet adapter pipe.
INSTALLATION PROCEDURE
1. Lubricate the O-ring.
2. Install the heater outlet adapter pipe.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the heater outlet adapter pipe mounting bolt.
Tighten
Tighten the heater outlet adapter pipe bolt to 6 N.m (53 lb in).
4. Install the heater outlet hose to the pipe adapter.
5. Use J 38185 in order to secure the heater core hose clamp.
6. Install the fuel injector sight shield.
7. Refill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.