Door Adjustment - Rear
UP/DOWN OR IN/OUT ADJUSTMENTRemoval Procedure
1. Open the front door.
2. Loosen two 13 mm door side hinge bolts (1). Do not remove the bolts.
3. Open the rear door.
4. Adjust the door up or down by repositioning the door as needed.
5. Adjust the door in or out by repositioning the door as needed.
Installation Procedure
NOTE: Refer to Fastener Notice in Service Precautions.
1. Tighten the two 13 mm front door side hinge bolts (1).
Tighten
Tighten the front door side hinge bolts (1) to 33 N.m (24 lb ft).
2. Inspect the door for proper operation.
FORE/AFT ADJUSTMENT
Removal Procedure
1. Loosen the two 13 mm body side hinge bolts (1). Do not remove them.
2. Loosen one 10 mm cone adjuster body side hinge bolt (2).
3. Adjust the door tore and aft by repositioning the door as needed.
Installation Procedure
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the one 10 mm cone adjuster body side hinge bolt (2).
Tighten
Tighten the cone adjuster body side hinge bolt (2) to 10 N.m (89 lb in).
2. Install the 2 13 mm body side hinge bolts (1).
Tighten
Tighten the body side hinge bolts to 33 N.m (24 lb ft).