Seat Replacement

Seat Replacement

Removal Procedure





1. Remove the front seat adjuster track covers. Refer to Front Seat Adjuster Track Finish Cover Replacement (Front Seat Adjuster Track Finish Cover Replacement) .
2. Remove the front seat head restraint. Refer to Front Seat Head Restraint Replacement (Front Seat Head Restraint Replacement) .
3. Position the front seat to the full forward and the full-up position.
4. Remove the nut from the front seat, seat belt retractor.
5. Remove the bolts from the rear of the seat adjuster.
6. Disconnect all electrical connectors as required.
7. Tilt the seat foreward and slid it back to disengage the seat adjuster hooks holding the seat to the floor pan.
8. Remove the front seat from the vehicle.



Installation Procedure





1. Install the front seat in the vehicle.
2. Engage the front seat hook attachments.
3. Connect all electrical connectors as required.
4. Install the front seat retractor side belt from the front seat. Refer to Front Seat Adjuster Track Finish Cover Replacement (Front Seat Adjuster Track Finish Cover Replacement) .

Notice: Refer to Fastener Notice in Cautions and Notices.

5. Install the bolts to the rear of the seat adjuster.

Tighten the front seat adjuster bolts to 42 N.m (31 lb ft).

6. Install the front seat adjuster track covers. Refer to Front Seat Adjuster Track Finish Cover Replacement (Front Seat Adjuster Track Finish Cover Replacement) .
7. Install the nut to the front seat, seat belt retractor.

Tighten the front seat, seat belt retractor nut to 42 N.m (31 lb ft).

8. Install the front seat head restraint. Refer to Front Seat Head Restraint Replacement (Front Seat Head Restraint Replacement) .
9. Inspect the front seat for proper operation.