Door Removal - Front

Door Removal - Front

Removal Procedure

1. Open and support the door.
2. Using a grease pencil, mark the location of the hinges to the door.




3. With an assistant, remove the door side hinge bolts.
4. Move the door away from the vehicle as far as the rubber conduit will permit.
5. Remove the rubber conduit.
6. Remove the door from the vehicle.

Installation Procedure

1. Position the door by the vehicle.
2. Install the rubber conduit.
3. With an assistant, align the hinge to the door to the grease pencil marks.






Notice: Refer to Fastener Notice in Service Precautions.

4. Install the hinge to door bolts.

Tighten the door hinge bolts to 26 N.m (19 lb ft).

5. Carefully close the door. Inspect the door for proper alignment.