Oil Pressure Sensor: Service and Repair

ENGINE OIL PRESSURE SENSOR OR SWITCH REPLACEMENT

TOOLS REQUIRED
J 35749 Oil Pressure Switch Socket

REMOVAL PROCEDURE




1. Turn off the ignition.
2. Remove the oil pressure sensor connector.
3. Remove the engine oil pressure sensor (1) using the J 35749

INSTALLATION PROCEDURE




1. Coat the sensor threads with sealer.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the oil pressure sensor (1) with the J 35749

Tighten
Tighten the sensor to 12 N.m (106 lb in).

3. Reconnect the oil pressure sensor connector.