Door Replacement - Rear Side

REMOVAL PROCEDURE
1. Remove the door trim panel.
2. Remove the water deflector.
3. Remove the inside handle.
4. Remove the window regulator.
5. Remove the energy absorber.
6. Remove the outside door handle.
7. Remove the lock cylinder.
8. Remove the door lock.
9. Remove the door window.
10. Remove the rear stationary window.
11. Remove the rear door reveal molding.
12. Remove the rear door from the vehicle.

INSTALLATION PROCEDURE
1. Install the rear door to the vehicle.
2. Install the rear door reveal molding.
3. Install the rear stationary window.
4. Install the door window.
5. Install the door lock.
6. Install the outside door handle.
7. Install the lock cylinder.
8. Install the energy absorber.
9. install the window regulator.
10. Install the inside handle.
11. Install the water deflector.
12. Install the door trim panel.
13. Carefully close the door. Inspect the door for proper alignment.