Front Seat Recliner Replacement (Sedan)

Front Seat Recliner Replacement (Sedan)

Removal Procedure




1. Remove the front bucket seat.
2. Remove the recliner finish cover screws.
3. Remove the recliner finish cover from the seat.
4. At the bottom of the seat back disengage the J-hook retainer for the seat back cover.
5. Remove enough of the seat back cover and pad to gain access to the recliner bolts (1).
6. Remove the recliner bolts (1, 2).
7. Remove the recliner from the seat.

Installation Procedure




1. Install the recliner to the seat.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the recliner bolts (1, 2).

Tighten the recliner bolts to 24 N.m (18 lb ft).

3. Install the seat back pad and cover to a desired appearance.
4. At the bottom of the seat back engage the J-hook retainer for the seat back cover.
5. Install the bucket seat.
6. Reposition the seat back to the original position.
7. Check the seat back for proper operation.