Air Duct: Service and Repair
AIR DISTRIBUTOR DUCT REPLACEMENTREMOVAL PROCEDURE
1. Remove the (IP) trim pad.
2. Remove the air distribution duct screws.
3. Remove the air distribution duct.
4. Remove the right side air distribution duct.
INSTALLATION PROCEDURE
1. Position the air distribution duct through the dash braces.
2. Move the duct until the lock tabs lock in position.
3. Install the air distribution duct and connect to the right side duct.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the air distribution duct screws.
Tighten
Tighten the screws to 2 N.m (18 lb in).
5. Install the IP trim pad.