Accelerator Controls Cable Bracket Replacement
REMOVAL PROCEDURE1. Remove the accelerator cable from the accelerator controls cable bracket.
2. Remove the cruise control cables from the accelerator controls cable bracket, if the vehicle is so equipped.
3. Remove the air cleaner outlet resonator assembly.
4. Remove the accelerator cable bracket attaching bolts (1) and the accelerator cable bracket (2).
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the accelerator cable bracket (2) with attaching bolts (1).
Tighten
Tighten bolts to 10 N.m (89 lb in).
NOTE: Align the accelerator bracket with the accelerator cam in order to prevent cable wear which could cause the cable to break.
2. Install the air cleaner outlet resonator assembly.
3. Install the accelerator cable and the cruise control cables, if the vehicle is so equipped.