Steering Column Jacket - Assemble

Important Replace the bearing and housing assembly and the pivot pins if the bearing and housing assembly has been staked 3 times.





1. Install the bearing and housing assembly.
2. Lubricate the pivot pins with lithium grease.





3. Install the 2 pivot pins.
4. Stake the pivot pins in 3 locations.
5. Install the tilt spring only. Refer to Tilt Spring-Assemble-Off Vehicle.
6. Install the Ignition switch assembly only. Refer to Ignition Switch Assembly-Assemble-Off Vehicle.
7. Install the lock housing assembly. Refer to Lock Housing Assembly-Assemble-Off Vehicle.