Window Channel Replacement - Front Side Rear

REMOVAL PROCEDURE




1. Remove the front door trim panel.
2. Remove the front door water deflector.
3. Remove the front door window.
4. Remove the front door reveal molding by the window rear channel.
5. Remove the bolt from the rear channel (2).
6. Lift up the rear channel to disengage the top clip.
7. Remove the window rear channel (1) from the front door.

INSTALLATION PROCEDURE




1. Position the rear run channel (1) in the front door.
2. Lift up the rear channel to install the top clip.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the window rear channel bolt (2).

Tighten
Tighten the lower window channel bolt 6 N.m (53 lb in).

4. Install the reveal molding.
5. Install the front door window.
6. Install the front door water deflector.
7. Install the front door trim panel.