Remote Playback Device

The remote playback device is 12 disc remote CD changer. The radio controls and communicates with the remote playback device through Class 2 communication.

The remote CD changer allows for up to 12 compact discs to be played continuously. Normal size discs may be played using the trays supplied in the magazine.

The magazine must first be loaded with discs before it can played. Press the button on the back of the magazine and pull gently on one of the trays. Load the trays from top to bottom, placing a disc on the tray label side up. If a disc is loaded label side down, the disc will not play and an error will occur. Gently push the tray back into the magazine. Repeat this procedure for loading up to 12 discs in the magazine. Once the discs are loaded into the magazine, slide open the door of the compact disc changer. Push the magazine into the changer in the direction of the arrow marked on the magazine. Close the door by sliding it all the way to the right. If the door is left partially open, the changer will not operate. When the door is closed, the changer will begin checking for discs in the magazine. This will continue for up to two minutes, depending on the number of discs loaded. To eject the magazine from the player, slide the CD changer door all the way open. The magazine will automatically eject. Whenever a CD magazine with discs is loaded in the changer, the CD changer symbol will appear on the radio display. If the CD changer is checking the magazine for CD's, the CD symbol will flash on the display until the changer is ready to play.