Turn Lamps

The T/SIG HAZ fuse in the rear fuse block supplies battery positive voltage to the flasher module. The module is part of the hazard switch assembly. The flasher module has ground at G201. The turn signal lamps may only be activated with the ignition switch in the ON or ACCY position. The IGN-1 fuse in the rear fuse block supplies battery positive voltage to the turn signal switch. When the turn signal switch is placed in either the left or right position, current flow is from the turn signal switch assembly to the flasher module. The flasher module then sends an on-off voltage signal to either the left or right turn signals and their Instrument Cluster (IPC) indicator. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn signal indicators. The hazard and turn signal lamp flasher assembly is grounded at G201. The left turn signals have ground at G103 and at G402. The right turn signals have ground at G401.