Steering Column Trim Covers - Disassemble

Steering Column Trim Covers - Disassemble - Off Vehicle

Caution: Refer to SIR Caution in Service Precaution.

1. Disable the inflatable restraint steering wheel module.

Important: Place the steering column in the center position.

2. Remove the tilt lever from the upper trim cover.
3. Remove the steering wheel from the steering column.
4. Remove the steering column from the vehicle.
5. Check the steering column for accident damage.





6. Remove 2 pan head tapping screws (2) from the lower trim cover (1).
7. Unsnap the closeout trim cover from the lower trim cover (1).
8. Remove the lower trim cover (1).





9. Remove 1 TORX(R) head screw (3) from the upper trim cover (1).
10. Remove the upper trim cover (1) with the closeout trim cover (2).





11. If necessary, remove the closeout trim cover (2) from the upper trim cover (1).