Front Suspension

Stabilizer Shaft Insulator Replacement

Removal Procedure
1. Raise and support the vehicle.





2. Remove the stabilizer shaft bracket bolts.
3. Remove the stabilizer shaft bracket.
4. Using a pry bar, lift upwards on the stabilizer shaft and remove the stabilizer shaft insulator.

Installation Procedure
1. Using a pry bar, lift up on the stabilizer shaft and install the stabilizer shaft insulator.
2. Install the stabilizer shaft bracket.

Notice: Refer to Fastener Notice in Service Precautions.





3. Install the stabilizer shaft bracket bolts.
Tighten the stabilizer shaft bracket bolts to 47 Nm (35 ft. lbs.).
4. Lower the vehicle.