Mirror Face Replacement

Mirror Face Replacement

Removal Procedure

Caution: Refer to Glass and Sheet Metal Handling Caution in Service Precautions.




1. Remove the mirror and the plastic backing plate (6).
Pull the assembly out of the mirror housing (3).
2. Remove the jack screws (1) from the mirror backing plate.

Installation Procedure




1. Snap the jack screws (1) into the power drive unit (4).
2. Push the mirror assembly in close to the power drive unit (4).
3. Align the swivel (6) on the power drive unit (4) to the pivot points in the mirror backing plate.
4. Push in the backing plate until a click is heard.