Courtesy Lamp Replacement - Rear Quarter

REMOVAL PROCEDURE




1. Using a thin-bladed tool, insert the edge of the tool under the lamp lens.
2. Carefully snap the lamp lens out of the pull handle assembly.




3. Using a thin-bladed tool, remove the metal shield by gently prying inward until the retainer tabs are released.
4. Remove the bulb.

INSTALLATION PROCEDURE




1. Insert the bulb into the pull handle assembly.
2. Install the metal shield by squeezing the metal shield together just far enough so the retainer tabs clear the notches in the lamp cavity.
3. Snap the lens into the pull handle assembly.