Transmission Temperature Sensor/Switch: Service and Repair

Fluid Temperature Sensor Replacement

Removal Procedure
1. Remove the case side cover.





2. Remove the end of the wiring harness assembly (2) with fluid temperature sensor (1) from the retaining clip.
3. Disconnect the wiring harness connector from the fluid temperature sensor (1).
4. Remove the fluid temperature sensor (1).

Installation Procedure





1. Connect the wiring harness connector to the fluid temperature sensor (1).
2. Install the wiring harness (2) and fluid temperature sensor (1) into the retaining clip.
3. Install the case side cover.
4. Fill the transaxle to the proper level.
5. Inspect the transaxle fluid level.
6. Inspect for fluid leaks.