Radio, Stereo, and Compact Disc: Service and Repair
STEERING WHEEL CONTROL SWITCHES REPLACEMENTREMOVAL PROCEDURE
1. Remove the inflatable restraint steering wheel module.
2. Remove the redundant radio control connector from the steering wheel retainer.
3. Disconnect the redundant radio control electrical connector.
4. Pry out the radio control switch at the lower edge.
5. Remove the radio control switch from the steering wheel.
Remove the wire harness connector from the controls.
INSTALLATION PROCEDURE
1. Install the wire harness connector to the controls.
2. Install the radio control switch to the steering wheel.
Press in the radio control switch in at the lower edge.
3. Connect the redundant radio control electrical connector.
4. Install the redundant radio control connector to the steering wheel retainer.
5. Install the inflatable restraint steering wheel module.