Finish Panel Replacement - Upper Rear Trim

Finish Panel Replacement - Upper Rear Trim

Removal Procedure




1. Raise the rear compartment liftgate (coupe only).
2. Remove the forward (front liftgate) trim panel (2) by pulling or gently prying 11 panel retainers from the liftgate.
3. Remove the rear (rear liftgate) trim panel (1) by pulling or gently prying panel retainers from the liftgate.

Installation Procedure




1. Install the rear liftgate trim pane (1) by aligning trim panel retainers and gently snap 11 retainers in place.
2. Install the forward (front liftgate) trim panel (2) by aligning trim panel retainers and gently snap 11 panel retainers in the liftgate.
3. Check for the proper install and alignment.
4. Close the rear compartment liftgate.