Weatherstrip Replacement - Folding Top Side Front

Weatherstrip Replacement - Folding Top Side Front

Removal Procedure




1. Lower the folding top to a suitable working position.
2. Disconnect the negative battery cable.
3. Remove the upper rear weatherstrip bolts (1) from the front side door window.
4. Remove the upper rear weatherstrip (2) from the front side door window.

Installation Procedure




1. Line up the top tab of the weatherstrip (1) to the notch in the weatherstrip retainer (2).
2. Insert the weatherstrip (1) into the retainer (2).
3. Roll the weatherstrip into place.






Notice: Refer to Fastener Notice in Service Precautions.

4. Install the upper rear weatherstrip bolts (1) to the front side door window.

Tighten the bolts to 1.3 N.m (12 lb in).

5. Connect the negative battery cable.
6. Raise the folding top.