Weatherstrip Retainer Replacement - Folding Top
Weatherstrip Retainer Replacement - Folding Top
Removal Procedure
1. Lower the folding top to a suitable working position.
2. Disconnect the negative battery cable.
3. Remove the folding top front weatherstrip.
4. Remove the retainer bolts (5) from the folding top front weatherstrip.
5. Remove the retainer (6) from the folding top front weatherstrip.
Installation Procedure
1. Install the retainer (6) to the folding top front weatherstrip.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the retainer bolts (5) to the folding top front weatherstrip.
Tighten the bolts to 10 N.m (89 lb in).
3. Install the folding top front weatherstrip.
4. Connect the negative battery cable.
5. Raise the folding top.