Seat Back Cover and Pad Replacement - Front (AQ9)

Seat Back Cover and Pad Replacement - Front (AQ9)

Removal Procedure

1. Place protective tape over nearby trim and paint.
2. Remove the front bucket seat.
3. Remove the head restraint from the front bucket seat back.
4. Remove the seat back from the seat back cushion.




5. Remove the seat back cover screws (4) and the hog rings retainer (3) from the seat back cover (5).
6. Remove the cover (5) from the pad (2).
7. Remove the pad (2) from the frame (1) if required.

Installation Procedure






Notice: Refer to Fastener Notice in Service Precautions.

1. Install the seat back pad (2) to the seat back frame (1) if required.
2. Install the cover (5) to the pad (2).
3. Install the cover screws (4) and the hog ring retainers (3) to the cover (5).

Tighten the screws to 1 N.m (9 lb in).

4. Install the seat back to the seat back cushion.
5. Install the head restraint to the front bucket seat back.
6. Install the front bucket seat.
7. Remove the protective tape from nearby trim and paint.