Seat Back Latch Replacement - Rear Folding

Seat Back Latch Replacement - Rear Folding

Removal Procedure




1. Fold down the rear seat back cushion (1).
2. Remove the seat back lock bolt (3).
3. Remove the seat back lock (2) and the washer (4).

Installation Procedure




1. Install the washer (4) and the seat back lock (2).
2. Place the locating pin for the seat back lock (2) through the opening in the seat back cushion (1).

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the seat back lock bolt (3).

Tighten the bolt to 27 N.m (20 lb ft).

4. Check seat back lock for proper operation.
5. Place the rear seat back to original position