Seat Cushion Cover Replacement - Rear

Seat Cushion Cover Replacement - Rear

Removal Procedure

1. Remove the rear seat cushion.




2. With a suitable tool, remove the hog ring retainers (3) from the rear seat cushion cover (1).
3. Reach inside of the cover (1) to unfasten the hook and loop retainers, which secure the cover to the pad (2).
4. Remove the cover (1) from the pad (2).

Installation Procedure




1. Position the cover (1) to the pad (2).
2. Align the alignment marks on the cover (1) to the alignment marks on the pad (2).
3. Pull the cover (1) over the pad (2) and pull over and under the edge.
4. Use firm hand pressure to fasten the hook and loop retainers, securing the cover (1) to the pad (2).
5. With a suitable tool install the hog ring retainers (3) to the cover (1).
6. Install the rear seat cushion.