Disc Brakes
| Brake Caliper Bleeder Valve | 106 inch lbs. | |
| Brake Caliper Guide Pin Bolt | 23 ft. lbs. | |
| Brake Caliper Mounting Bracket Bolt | 74 ft. lbs. | |
| Brake Hose Fitting Bolt | 41 ft. lbs. | |
| Wheel Nut | 100 ft. lbs. | |
| Front Brakes | Rotor Discard Thickness* | 1.209 inch All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness after refinish specifications. |
| Rotor Maximum Allowable Lateral Runout | 0.002 inch | |
| Rotor Maximum Allowable Scoring | 0.059 inch | |
| Rotor Maximum Allowable Thickness Variation | 0.001 inch | |
| Rotor Minimum Allowable Thickness After Refinishing | 1.223 inch | |
| Rotor Thickness, New | 1.26 inch | |
| Rear Brakes | Rotor Discard Thickness* | 0.965 inch All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness after refinish specifications. |
| Rotor Maximum Allowable Lateral Runout | 0.002 inch | |
| Rotor Maximum Allowable Scoring | 0.059 inch | |
| Rotor Maximum Allowable Thickness Variation | 0.001 inch | |
| Rotor Minimum Allowable Thickness After Refinishing | 0.980 inch | |
| Rotor Thickness, New | 1.020 inch |