General Information

The blower motor forces outside air into the vehicle's interior. The vehicle operator determines the blower motor's speed when the driver places the blower motor switch in one of the following positions:
^ Low (1)
^ Medium 1 (2)
^ Medium 2 (3)
^ High (4)

The blower motor will operate in any switch position other than OFF, as long as the ignition switch is in the RUN position. When the ignition switch is ON, power from the instrument panel fuse block is delivered to the mode switch first before going to the blower motor switch. The blower motor and mode switches are located within the HVAC control assembly.

Power is provided to the blower motor from either the instrument panel fuse block or underhood fuse block. Depending upon the selected blower speeds, voltage is either supplied directly to the blower motor or voltage is varied by a series of in-line resistors. Power and ground are provided to the HVAC control assembly by the ignition 3 voltage and ground circuits.