Fog Lamp Bulb Replacement - Front (Trans Am)
REMOVAL PROCEDURECAUTION: Refer to Halogen Bulb Caution in Service Precautions
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the push pin retainers which are located at the bottom center of the front fascia.
3. Disconnect the electrical connector from the fog lamp bulb/socket.
4. Remove the fog lamp bulb/socket from the fog lamp (1).
INSTALLATION PROCEDURE
1. Install the fog lamp bulb/socket to the fog lamp (1).
2. Connect the electrical connector to the fog lamp bulb/socket.
3. Install the push pin retainers to the bottom center of the front fascia.
4. Lower the vehicle.