Fog Lamp Replacement - Front (Formula)

REMOVAL PROCEDURE

CAUTION: Refer to Halogen Bulb Caution in Service Precautions.




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Open the access door in the front bumper air deflector.
3. Disconnect the tog lamp electrical connector from the socket.
4. Remove the fog lamp nuts.
5. Remove the fog lamp (1) from the vehicle.

INSTALLATION PROCEDURE




1. Position the fog lamp (1) to the vehicle.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the tog lamp nuts.

Tighten
Tighten the fog lamp nuts to 8 N.m (71 lb in).

3. Connect the tog lamp electrical connector to the socket.
4. Close the access door in the front bumper air deflector.
5. Lower the vehicle.