Outlet

Radiator Hose Replacement - Outlet

Removal Procedure





1. Drain the cooling system.
2. Disconnect the intake air temperature sensor electrical connector.





3. Loosen the air duct clamp.
4. Remove the intake air duct resonator.
5. Reposition the radiator outlet hose clamp from the water pump.





6. Remove the radiator outlet hose from the water pump.
7. Raise and suitably support the vehicle. Refer to Vehicle Lifting.





8. Reposition the radiator outlet hose clamp from the radiator.
9. Remove the radiator outlet hose (2) from the radiator.
10. Remove the radiator outlet hose support from the fan shroud.

Installation Procedure





1. Install the radiator outlet hose support to the fan shroud.
2. Install the radiator outlet hose (2) to the radiator.
3. Reposition the radiator outlet hose clamp to the radiator.
4. Lower the vehicle.





5. Install the radiator outlet hose to the water pump.
6. Position the radiator outlet hose to the water pump.





7. Install the intake air duct resonator.
8. Tighten the air duct clamp.





9. Connect the intake air temperature sensor electrical connector.
10. Connect the mass air flow electrical connector.
11. Fill the cooling system.