| Accelerator Control Assy to Floor-Exterior Retaining Bolt | 8 N.m |
| Accelerator Control Assy to Interior Floor Retaining Bolt | 25 N.m |
| Accelerator Control Assy to Interior Floor Retaining Nut | 20 N.m |
| Camshaft Position (CMP) Sensor Retaining Bolt | 10 N.m |
| Crankshaft Position (CKP) Sensor Bolts | 30 N.m |
| EGR Valve Adapter Pipe Stud | 50 N.m |
| EGR Valve Intake Pipe to Exhaust Manifold Bolt | 29 N.m |
| EGR Valve Outlet Pipe to Adapter Nut | 29 N.m |
| EGR Valve to Retaining Nuts | 30 N.m |
| Engine Coolant Temperature (ECT) Sensor | 20 N.m |
| Evaporative Emission (EVAP) Purge Valve Retaining Bolt | 10 N.m |
| Exhaust Gas Recirculation (EGR) Valve Adapter Pipe Bolt | 25 N.m |
| Fuel Filler Neck Bolts | 2.5 N.m |
| Fuel Pipe Clip Bolt | 5.5 N.m |
| Fuel Pipe Clip Studs | 5 N.m |
| Fuel Pipe Shield Bolt and Nuts | 5 N.m |
| Fuel Rail Attaching Bolts | 10 N.m |
| Fuel Tank Filler Pipe Ground Strap Bolt | 8 N.m |
| Fuel Tank Filler Pipe Support Bracket Bolt | 10 N.m |
| Fuel Tank Filler Pipe and Vent Hose Clamp | 2.5 N.m |
| Fuel Tank Retaining Strap Bolts | 45 N.m |
| Heated Oxygen Sensors (HO2S) | 42 N.m |
| Ignition Coil (IC) to Ignition Control Module (ICM) Screws | 4.5 N.m |
| Ignition Control Module 14 Way Connector To Module Bolt | 2.1 N.m |
| In-Line Fuel Filter Outlet Nut | 30 N.m |
| Intake Air Duct Clamps | 2 N.m |
| Knock Sensor (KS) | 19 N.m |
| Mass Air (MAF) Flow Sensor Attaching Screws | 3 N.m |
| Powertrain Control Module (PCM) Bolts | 8 N.m |
| Spark Plugs | 15 N.m |
| Throttle Actuator Control (TAC) Module to Accelerator Control Bracket Bolts | 6 N.m |
| Throttle Body Retaining Nuts or Bolts | 10 N.m |