Balance Shaft
| End Play | 0.0-0.0067 in. | |
| Rear Journal Diameter | 1.4994-1.5002 in. | |
| Radial Play-Front, Bearing Clearance | 0 0-0.0010 in. | |
| Rear Bearing to Journal Clearance | 0.0005-0.0043 in. | |
| Drive Gear Lash | 0.002-0.0049 in. | |
| Bearing Bore Diameter-Front | 2.0462-2.0472 in. | |
| Bearing Bore Diameter-Rear, In Block | 1.8735 -1.8745 in. | |
| Bearing Inside Diameter-Rear | 1.5007-1.5037 in. | |
| Balance shaft driven gear bolt | First pass | 16 ft.lbs. |
| Final pass | 70 degrees | |
| Balance shaft retainer bolt | 22 ft.lbs. |