Starter Shield Replacement

REMOVAL PROCEDURE




1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the starter motor shield bolts (1, 3) and nut (2).
3. Remove the starter motor shield.

INSTALLATION PROCEDURE




1. Install the starter motor shield

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the starter shield nut (2) and bolts (1, 3).

Tighten
^ Tighten to starter motor shield bolt (1) to 30 N.m (22 lb ft).
^ Tighten the starter motor shield bolt (3) and nut (2) to 10 N.m (89 lb in).

3. Lower the vehicle.