Clutch Housing Replacement
Clutch Housing ReplacementRemoval Procedure
1. Remove the manual transmission.
2. Remove the clutch actuator cylinder bolts (1).
3. Remove the transmission bolts (3).
4. Separate the flywheel/clutch housing (1) from the transmission (2).
Remove the flywheel/clutch housing (1) and clutch actuator cylinder from the transmission (2).
Installation Procedure
1. Install the flywheel/clutch housing (1) and clutch actuator cylinder to the transmission (2).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the transmission bolts (3).
^ Tighten the 5-speed transmission bolts (3) to 75 Nm (55 ft. lbs.).
^ Tighten the 6-speed transmission bolts to 50 Nm (37 ft. lbs.).
3. Install the clutch actuator cylinder bolts (1).
^ Tighten the clutch actuator cylinder bolts (1 ) to 8 Nm (71 inch lbs.).
4. Install the manual transmission.