Seat Cushion Replacement - Rear

Seat Cushion Replacement - Rear

Removal Procedure

1. Place a protective barrier over the nearby trim and paint.




2. Remove bolt (2) from the base of the rear seat cushions (1).




3. Remove rear seat cushion by pulling upward and forward.
4. Remove rear seat cushion from the vehicle.

Installation Procedure




1. Install the rear seat cushions into the vehicle.
2. Insert rear edge of seat into the cavity, pushing in and downward.






Notice: Refer to Fastener Notice in Service Precautions.

3. Install the bolt (2) to the base (1) of the rear seat cushion.

Tighten the bolt to 25 N.m (18 lb ft).

4. Remove the protective barrier from the nearby trim and paint.