Seat Riser Trim Cover Replacement - Power

Seat Riser Trim Cover Replacement - Power

Removal Procedure

1. Place protective tape over nearby trim and paint.
2. Remove the front bucket power seat.




3. Remove the screws (7) from the seat riser trim cover (1), and remove the trim cover from the seat adjuster track.

Installation Procedure




1. Install the seat riser trim cover (1) to the driver seat adjuster track.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the screw (7) to the seat riser trim cover (1).

Tighten the screws to 1.7 N.m (15 lb in).

3. Install the front bucket power seat.
4. Remove the protective tape over nearby trim and paint.