4. Clutch Pilot Bearing Removal

Clutch Pilot Bearing Removal

- Tools Required
- J 43276 Clutch Pilot Bearing Remover

Notice: When using the J 43276 Clutch Pilot Bearing Remover always secure the J 43276-1 Clutch Pilot Bearing Remover tool body using a wrench. Do not allow the J 43276-1 tool body to rotate. Failing to do so will cause damage to the J 43276-1 tool body.





1. Remove the clutch pilot bearing using the J 43276.
1.1. Install the J 43276-1 into the clutch pilot bearing.
1.2. Using a wrench, secure the J 43276-1.
1.3. Insert the J 43276-2 into the J 43276-1.
1.4. Rotate the J 43276-2 clockwise into the J 43276-1 until the clutch pilot bearing is completely removed from the crankshaft.
1.5. Rotate the J 43276-2 counterclockwise to remove the J 43276-2 from the J 43276-1.
1.6. Remove the J 43276-1 from the tool body.





2. Discard the pilot bearing.