Fuel Pressure Gage Installation and Removal

FUEL PRESSURE GAGE INSTALLATION AND REMOVAL

INSTALLATION PROCEDURE

CAUTION:
^ Refer to Gasoline/Gasoline Vapors Caution in Service Precautions.
^ Refer to Fuel Gage Leak Caution in Service Precautions.

NOTE: Refer to Fuel and Evaporative Emission (EVAP) Hose/Pipe Connection Cleaning Notice in Service Precautions.




1. Install the fuel pressure gage to the fuel pressure service connection, located on the fuel rail.
2. Turn ON the ignition.

CAUTION: Refer to Fuel Storage Caution in Service Precautions.

3. Place the bleed hose of the fuel pressure gage into an approved gasoline container.
4. Open the bleed valve on the fuel pressure gage in order to bleed the air from the fuel pressure gage.
5. Use the scan tool in order to command the fuel pump ON.
6. Close the bleed valve on the fuel pressure gage.
7. Inspect for fuel leaks.