Daytime Running Lamp: Service and Repair

DAYTIME RUNNING LAMPS (DRL) AMBIENT LIGHT SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the IP upper trim pad (2).
2. Remove the DRL ambient light sensor (3) from the trim pad (2). Twist the DRL ambient light sensor (3) counterclockwise.
3. Disconnect the DRL electrical connector from the sensor (3).

INSTALLATION PROCEDURE




1. Connect the sensor (3) to the DRL electrical connector.
2. Install the DRL ambient light sensor (3) to the trim panel (2). Twist the DRL ambient light sensor (3) clockwise.
3. Install the IP upper trim pad.