Headlamp Motor: Service and Repair
HEADLAMP MOTOR/ACTUATOR REPLACEMENTREMOVAL PROCEDURE
1. Remove the headlamp assembly.
2. Disconnect the headlamp wiring harness electrical connectors from the headlamp bulbs (5).
IMPORTANT: Take note of the linkage to motor relationship for reassembly.
Remove the nut (3) retaining the headlamp assembly pivot arm (4) to the headlamp motor/actuator (1).
3. Remove the bolts (2) mounting the motor to the headlamp assembly.
4. Remove the headlamp motor/actuator.
INSTALLATION PROCEDURE
1. Install the motor/actuator into position on the headlamp assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the headlamp motor/actuator bolts to the headlamp assembly.
Tighten
Tighten the headlamp motor/actuator bolts to 7 N.m (62 lb in).
3. Install the pivot arm (4) with retaining nut (3) to the headlamp motor/actuator (1).
Tighten
Tighten the headlamp motor/actuator to pivot arm nut to 56 N.m (50 lb in).
4. Install the headlamp assembly to the vehicle.
5. Connect the headlamp wiring harness (5) electrical connectors to the headlamp bolts.