Operation CHARM: Car repair manuals for everyone.

Horns Always On

TEST DESCRIPTION

Steps 1-13:




The numbers below refer to the step numbers on the diagnostic table
6. Tests if ground is constantly being applied to the horn relay.
8. The horn relay control circuit includes the horn slip ring and the horn switches. The horn slip ring and the horn switches must be tested for a short to ground. Refer to Circuit Testing and Wiring Repairs in Diagrams.

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes