Park, Tail, Marker, and License Lamps - Europe, Scandinavia

The parking lamps include all of the following lamps:
^ The tail lamps
^ The license lamps
^ The marker lamps

The park lamps are turned on only when the headlamp switch is placed in either the PARK or HEAD position, Europe only.

The park lamps may be turned on 2 different ways, Scandinavia only. First, when the driver places the headlamp switch in the PARK or HEAD position, for manual operation. Second, with the headlamp switch placed in the OFF position and the ignition switch is in the RUN position for DRL operation. DRL does not apply to Europe.

For both vehicles the TAIL LPS fuse in the IP fuse block, supplies battery positive voltage to headlamp switch. When the headlamp switch is placed in the PARK or HEAD position. Current flows from the headlamp switch to the license lamps, marker lamps and the auxiliary tail lamp fuse holders. Current then flows from the auxiliary tail lamp fuse holders to the tail lamps. The tail lamps, marker lamps, and license lamps are grounded at G400.